protek

ProTek RC P-8 1/8 Buggy Super Hauler Bag (Plastic Inner Boxes) PTK-8000

ProTek RC P-8 1/8 Buggy Super Hauler Bag (Plastic Inner Boxes) PTK-8000

ProTek RC P-8 1/8 Buggy Super Hauler Bag (Plastic Inner Boxes) PTK-8000
This is the ProTek R/C P-8 1/8 Scale Buggy Super Hauler Bag. The P-8 Super Hauler Bag has evolved, and now features a variety of improvements that make the P-8 a durable, high quality, easier to use piece of luggage. These improvements include plastic interior framing and additional velcro surfaces that secure the shelves on the sides and rear, to prevent the shelves from sagging and causing the drawers to hang up when they are being pulled out or slid into position. Protective zipper tabs have been added to the front cover to help protect the zippers during transportation, and a solid velcro strip has been added to the entire length of the lower portion of the front cover to help keep the cover secured. When the cover is rolled up there are now five velcro tabs (instead of three), that will help to prevent the cover from coming loose when its rolled up. Finally, the graphic on the front features the ProTek R/C checkered flag graphic, with a ProTek R/C logo on the rear flap. The ProTek R/C P-8 super hauler bag was designed from the ground up for 1/8th scale buggy racers. The bag has space on top under a covered flap for storing all your tools, a place on the back for your setup board and storage compartments on the side for storing your setup equipment or other tools. Inside the bag has three layers of drawers, with four split draws on the bottom (two each side by side above each other) and one large drawer on the top. These are the newer style Hauler Bags that have plastic inner boxes. The large drawer on the top is large enough to hold a 1/8th scale buggy with wing and wheels attached! In addition, it is also very easy to tow the bag around the track as it features a heavy duty retractable handle and smooth trolley wheels. Also included is a carrying strap that can be moved out of the way to access tools in the top compartment, or adjusted to provide easy carrying of the bag. Specifications: Overall Bag Dimensions (WxHxD): 21.65×23.22×13.77″ Large Drawer Dimensions (WxHxD): 19.5×7.5×12.5″ Medium Drawer Dimensions (WxHxD): 9.5×4.5×12.5″ Small Drawer Dimensions (WxHxD): 8.5×4.5×12.5″ Dimensions may vary slightly due to manufacturers tolerances. No outside sales or payments. We only accept U. (These are the buyers responsibility). We do not lower the value on packages. All manufacturers require us to have buyers forward all warranties to them. Powered by SixBit’s eCommerce Solution. The item “ProTek RC P-8 1/8 Buggy Super Hauler Bag (Plastic Inner Boxes) PTK-8000″ is in sale since Monday, October 19, 2020. This item is in the category “Toys & Hobbies\Radio Control & Control Line\RC Model Vehicle Parts & Accs\Body Parts & Interior\Cars, Trucks & Motorcycles”. The seller is “pa39r” and is located in Lebanon, New Jersey. This item can be shipped worldwide.
  • Brand: ProTek
  • MPN: PTK-8000
  • UPC: Does Not Apply
  • Item Condition: New

ProTek RC P-8 1/8 Buggy Super Hauler Bag (Plastic Inner Boxes) PTK-8000

ProTek RC SureStart Professional 1/8 Off-Road Starter Box PTK-4500

ProTek RC SureStart Professional 1/8 Off-Road Starter Box PTK-4500
ProTek RC SureStart Professional 1/8 Off-Road Starter Box PTK-4500
ProTek RC SureStart Professional 1/8 Off-Road Starter Box PTK-4500

ProTek RC SureStart Professional 1/8 Off-Road Starter Box PTK-4500
This is the ProTek R/C “SureStart” Professional 1/8 Off-Road Starter Box. The ProTek R/C “SureStart” starter box was developed to provide 1/8 scale off road enthusiasts with a starter box that exceeds expectations. Breaking in a new engine? Tight engines are no match for the “SureStart”. With dual 6300 RPM – 750 size motors, the “SureStart” delivers the power needed to turn over the most stubborn engines. T-Style connectors are pre-installed, providing a low resistance connection out of the box. The entire system is wired with high quality 16awg silicone shielded wire and quick change connectors that make maintenance easy. The battery tray will fit common 7.2V NiMH or 7.4V LiPo packs, providing an easy to use setup that is compatible with batteries you probably already have on hand. With minor modification, the battery tray will easily fit a 4S starter box pack. Another unique feature is the quick access cover release tab that exposes the inside of the starter box without the need for tools. When its time to get inside the box, simply press the tab and lift the lid! Backed by the power of ProTek R/C, the “SureStart” starter box provides nitro enthusiasts with a powerful and affordable solution that wont leave you stuck in a pinch. Fits 1/8 Buggy & Truggy. Compact Size (12¼ long x 5¼ wide top deck, 3½ tall, 12¾ total length – 4.2lbs w/no batteries). 95% Assembled – just install chassis retaining tray and adjust holding pins. EZ Access Cover Release – No tools needed to access batteries. Adjustable chassis holding pins and sliding tray for fast and easy setup. Twin 750 – 6300 RPM Motors. Factory installed T-Style connectors. Wiring and battery tray compatible with two 7.2V NiMH stick packs, or two 2S LiPo packs in series (batteries not included). Handle can hold a glow ignitor, tuning driver, glow plug wrench and spare glow plugs. High quality 16awg Silicone wiring and quick change connectors allow fast repairs with no soldering necessary. Fits batteries 150x46x25.2mm. Specifications: Motor: 750 – 6300 RPM Motors x2 Deck Dimensions: 12¼” long, 5¼” wide Overall Length: 13¾” Overall Height: 3½” Weight: 4.2lbs w/no batteries Battery Holder Dimensions (LxWxH): 150x46x25.2mm (Length Adjustable) Battery Connectors: T-Style. Battery Note: The SureStart comes equipped with a Y-Harness power lead to accommodate either two 2S LiPo or two 6-Cell NiMH batteries. You can however use a single 4S LiPo battery to power the SureStart, BUT some modification is required – you will need to remove the Y-Harness power lead and re-solder a single T-Style connector to the power leads. Starter Wheel Note: From the factory, the rubber starter wheel may be slightly too low to effectively contact the flywheel; but there is an easy fix! Simply install washers under the motor/belt bulkhead and the starter wheel lifts up for a longer reach. No outside sales or payments. We only accept U. (These are the buyers responsibility). We do not lower the value on packages. All manufacturers require us to have buyers forward all warranties to them. Powered by SixBit’s eCommerce Solution. The item “ProTek RC SureStart Professional 1/8 Off-Road Starter Box PTK-4500″ is in sale since Wednesday, June 14, 2017. This item is in the category “Toys & Hobbies\Radio Control & Control Line\RC Model Vehicle Parts & Accs\Body Parts & Interior\Cars, Trucks & Motorcycles”. The seller is “pa39r” and is located in Lebanon, New Jersey. This item can be shipped worldwide.
  • Brand: ProTek
  • MPN: PTK-4500
  • UPC: Does Not Apply
  • Item Condition: New

ProTek RC SureStart Professional 1/8 Off-Road Starter Box PTK-4500